Used Friulmac Model Quadramat Single-End Tenoner

Stock #10046 - Available (As Taken From Service)

 

10046-02.JPG
10046-02.JPG
10046-03.JPG
10046-04.JPG
10046-05.JPG
10046-06.JPG
10046-07.JPG
10046-08.JPG
10046-09.JPG
10046-10.JPG
10046-11.JPG
10046-12.JPG
10046-13.JPG
10046-14.JPG
10046-15.JPG
10046-16.JPG
10046-17.JPG
10046-18.JPG
10046-19.JPG
10046-20.JPG
10046-21.JPG
10046-22.JPG
10046-23.JPG
10046-24.JPG
10046-25.JPG
10046-26.JPG
10046-27.JPG
10046-30.JPG
10046-31.JPG
10046-32.JPG
10046-33.JPG
10046-34.JPG
10046-35.JPG
10046-36.JPG
10046-37.JPG
10046-38.JPG
10046-39.JPG
10046-40.JPG
10046-41.JPG
10046-42.JPG
10046-43.JPG
10046-44.JPG
10046-45.JPG
10046-46.JPG
10046-47.JPG
10046-48.JPG

  • Single Side Shape and Sand Machine
  • Load Space 642mm (25")
  • Thickness 10mm (0.4") Minimum to 100mm (4") Maximum
  • Stations:
  • High Speed Universal Spindle : 5.5/8HP; 50/100 Hz, Electro-Spindle Motor Two speed 3/6000 RPM with Inverter, Spindle Diameter 40mm x 100mm Long, 250mm (10") Maximum Diameter Tooling, Quick Change Tool Joint MHD-40, Tilting Manual Adjustment with Mechanical Digital Indicator
  • High Speed Universal Motor (with extended Arbor to Pass Thru Chain Beam for Grooving) : 5.5/8HP; 50/100Hz, Electro-Spindle Motor Two speed 3/6000 RPM with Inverter, Spindle Diameter 40mm x 100mm Long, 250mm (10") Maximum Diameter Tooling, Quick Change Tool Joint MHD-40, Tilting Manual Adjustment with Mechanical Digital Indicator
  • Sanding Motor: 2.5 HP Tilting
  • Dual Spindle Sanding units each 2.5HP
  • Feed motor: 6.5HP
  • Feed Speeds 4-30 Mt/min (13-98 ft/min)
  • Feed Chains 3.75" wide, Rubber Padded with Pop-up Dogs 12.5" on Center
  • Top Pressure with non-stainable Dual Rubber Track Driven by Gear Motor and Inverter with Speed Adjustment Synchronously to the Chains Feeding Speed
  • Infeed Fence Left Side
  • Left side Support Chain 3" Wide Rubber Padded Moves to 36" from Main Chain Beam
  • Complete control panel and Safety Enclosure
  • Serial No. 3437B
  • NEW IN 2003

You may also be interested in