Used Weinig Model Powermat 500 Six Head Moulder - 2005!

Stock #47146 - Sold (As Taken From Service)

 

47146-44.JPG
47146-44.JPG
47146-01.JPG
47146-02.JPG
47146-03.JPG
47146-04.JPG
47146-05.JPG
47146-06.JPG
47146-07.JPG
47146-08.JPG
47146-09.JPG
47146-10.JPG
47146-11.JPG
47146-12.JPG
47146-13.JPG
47146-14.JPG
47146-15.JPG
47146-16.JPG
47146-17.JPG
47146-18.JPG
47146-19.JPG
47146-20.JPG
47146-21.JPG
47146-22.JPG
47146-23.JPG
47146-24.JPG
47146-25.JPG
47146-26.JPG
47146-27.JPG
47146-28.JPG
47146-29.JPG
47146-30.JPG
47146-31.JPG
47146-32.JPG
47146-33.JPG
47146-34.JPG
47146-35.JPG
47146-36.JPG
47146-37.JPG
47146-38.JPG
47146-39.JPG
47146-40.JPG
47146-41.JPG
47146-42.JPG
47146-45.JPG
47146-46.JPG
47146-47.JPG
47146-49.JPG
47146-50.JPG
47146-51.JPG
47146-52.JPG
47146-53.JPG
47146-54.JPG

  • Supplied with PowerCom
  • Equipped with "PowerLock" HSK Type Spindles on Heads 2, 3, 5, & 6
  • Heads 1 & 4 are Standard 1-13/16" Diameter Spindles
  • Includes 28 "PowerLock" HSK Cutterheads, Four Straight-Bore Spiral Insert Heads, and Seven Four-Knife Standard Bore Cutterheads
  • Working Width: 3/4" - 9-1/16"
  • Working Thickness: 5/16" - 5"
  • Head Sequence: Bottom - 15 HP Brake Motor, Right - 15 HP Brake Motor, Left - 15 HP Brake Motor, Top - 25 HP Brake Motor, Top - 20 HP Brake Motor, Bottom - 7.4 HP Brake Motor
  • Motor driven positioning, radial #2,3,4,5
  • Motor driven positioning, axial #5, Motor driven positioning, feed
  • Spindle Speeds: 8,000 RPM
  • Feed Motor: 7.5 HP Frequency Controlled
  • Variable Speed Feed from 16 - 100 FPM
  • Motorized Thickness Adjustment
  • 79" Infeed Table
  • Manual Infeed Table Adjustment
  • Digital Readouts for Ease of Set-up
  • Weinig Touch-Screen Control w/ Push-Buttons
  • Sound/Safety Enclosure
  • 480v, 3ph
  • Year: 2005
  • Serial #: 104623

You may also be interested in