Used Friulmac Model Quadramat Double End Tenoner

Stock #101115 - Available (Cleaned and Checked)

 

101115-1.jpg
101115-1.jpg
101115-10.JPG
101115-11.JPG
101115-12.JPG
101115-2.JPG
101115-3.JPG
101115-4.JPG
101115-5.JPG
101115-6.JPG
101115-7.JPG
101115-8.JPG
101115-9.JPG

  • Capacity 180mm (7.2") Minimum to 2500mm (100") Maximum Opening
  • Load Space 642mm (25")
  • Thickness 10mm (0.4") Minimum to 100mm (4") Maximum
  • Stations:
  • Tilting Trims: 5.5/8HP; 50/100 Hz, Two Speed Electro-Spindle Motor 3/6000 RPM with Inverter, Spindle 40mm Dia x 62mm long
  • High Speed Jump Cope : 5.5/8HP; 50/100 Hz, Electro-Spindle Motor Two speed 3/6000 RPM with Inverter, Spindle Diameter 40mm x 100mm Long, 250mm (10") Maximum Diameter Tooling, Quick Change Tool Joint MHD-40, Tilting Manual Adjustment with Mechanical Digital Indicator
  • High Speed Cope : 5.5/8HP; 50/100Hz, Electro-Spindle Motor Two speed 3/6000 RPM with Inverter, Spindle Diameter 40mm x 100mm Long, 250mm (10") Maximum Diameter Tooling, Quick Change Tool Joint MHD-40, Tilting Manual Adjustment with Mechanical Digital Indicator
  • Dual Spindle Sanding units each 1HP
  • Feed motor: 4.5HP
  • Feed Speeds 4-30 Mt/min (13-98 ft/min)
  • Traverse motor: HP
  • Feed Chains 2-7/8" wide, Rubber Padded
  • Top Pressure with non-stainable rubber track Driven by Gear Motor and Inverter with Speed Adjustment Synchronously to the Chains Feeding Speed
  • Infeed Fence Left Side
  • Left side fixed, right side adjusts
  • Complete control panel
  • Serial No. 3364A
  • NEW IN 2003

You may also be interested in