Used Brandt Model Optimat KDF 640 Edgebander

Stock #25135 - Available (As Taken From Service)

 

25135-02.JPG
25135-02.JPG
25135-03.JPG
25135-04.JPG
25135-05.JPG
25135-06.JPG
25135-07.JPG
25135-08.JPG
25135-09.JPG
25135-10.JPG
25135-11.JPG
25135-12.JPG
25135-13.JPG
25135-14.JPG
25135-15.JPG
25135-16.JPG
25135-17.JPG
25135-18.JPG
25135-19.JPG
25135-20.JPG
25135-21.JPG
25135-22.JPG
25135-23.JPG
25135-24.JPG
25135-25.JPG
25135-26.JPG
25135-27.JPG
25135-28.JPG
25135-29.JPG
25135-30.JPG
25135-31.JPG
25135-32.JPG
25135-33.JPG
25135-34.JPG
25135-35.JPG
25135-36.JPG
25135-37.JPG
25135-38.JPG
25135-39.JPG

  • Edgeband Thickness: 0.4 - 12mm
  • Edgeband Height: 12 - 60mm
  • Minimum Panel Length: 160mm
  • Minimum Panel Width: 65mm
  • Panel Thickness: 8 - 55mm
  • Feed Speed: 46 FPM
  • Pre-Mill/Joint-Trimming Unit w/ Two 3 HP Motors
  • Pneumatic Guillotine
  • Four-Roll Pressure-Section
  • Quickmelt Gluing System
  • Two-Motor End-Trim Station, Program Controlled Indexing from Straight to Bevel
  • Top & Bottom Fine Trimming Unit w/ Program Controlled Pneumatic Indexing
  • Top & Bottom Scraping Unit w/ Program Controlled Pneumatic Indexing
  • Top & Bottom Buffing Unit
  • 3 HP Feed Motor
  • Sound/Safety Enclosure
  • PC-16 Program Control
  • Adjustable Outrigger

You may also be interested in