Used Friulmac Model Dualfeed Double End Trim/Moulder Feeder

Stock #47138 - Sold (Cleaned and Checked)

 

47138-1.JPG
47138-1.JPG
47138-10.JPG
47138-11.JPG
47138-12.JPG
47138-13.JPG
47138-14.JPG
47138-15.JPG
47138-16.JPG
47138-17.JPG
47138-18.JPG
47138-19.JPG
47138-2.JPG
47138-20.JPG
47138-21.JPG
47138-22.JPG
47138-23.JPG
47138-24.JPG
47138-3.JPG
47138-4.JPG
47138-5.JPG
47138-6.JPG
47138-7.JPG
47138-8.JPG
47138-9.JPG

  • Trims parts to length and automatically feeds moulder
  • Maximum part length capacity: 79"
  • Maximum part width: Approx. 6-3/4"
  • Maximum part thickness: Approx. 2"
  • Min. part length: 7.87" (200 mm)
  • Hopper feed
  • Capable of trimming up to 55 pieces/minute
  • (2) 5.36 HP belted trim units for higher finish
  • 10" diameter saw blade capacity (set of used blades furnished with machine)
  • 4 HP Hydraulic feed
  • (3) feed rollers for introducing parts to the moulder
  • Motorized open and close with electronic digital readout for length setting
  • Voltage: 460 Volt, 3 phase
  • Serial number: 3956A

You may also be interested in