Used Stanza Model STM UV Finishing Line

Stock #2989 - Sold (As Taken From Service)

 

2989-05.JPG
2989-05.JPG
2989-03.JPG
2989-06.JPG
2989-07.JPG
2989-08.JPG
2989-09.JPG
2989-10.JPG
2989-11.JPG
2989-12.JPG
2989-13.JPG
2989-14.JPG
2989-15.JPG
2989-16.JPG
2989-17.JPG
2989-18.JPG
2989-19.JPG
2989-20.JPG
2989-21.JPG
2989-22.JPG
2989-23.JPG
2989-24.JPG
2989-25.JPG
2989-26.JPG
2989-27.JPG
2989-28.JPG
2989-29.JPG
2989-30.JPG
2989-31.JPG
2989-32.JPG
2989-33.JPG
2989-34.JPG
2989-35.JPG
2989-36.JPG
2989-37.JPG
2989-38.JPG
2989-39.JPG
2989-40.JPG
2989-41.JPG
2989-42.JPG
2989-43.JPG
2989-44.JPG
2989-45.JPG
2989-46.JPG
2989-47.JPG
2989-48.JPG
2989-49.JPG
2989-50.JPG
2989-51.JPG
2989-52.JPG
2989-53.JPG
2989-54.JPG
2989-55.JPG
2989-56.JPG
2989-57.JPG
2989-58.JPG
2989-59.JPG
2989-60.JPG

  • Model CV3 belt conveyor 24" wide x 10' long with 1/2HP motor
  • Mode RC 24-B roll coater
  • Work Maximum work piece dimension 24" w x 3" thick
  • Feed speed 10-40 fpm with 1HP inverter controlled motor
  • Application Roller #1 - Rubber coated UV/chemical resistant, 9 degree
  • Application Roller #2 - Rubber coated UV/chemical resistant, 25 degree
  • Chrome plated doctor rolls with scraper
  • Roller drive motors 1HP inverter controlled
  • Two Graco double diaphragm pumps UV capable
  • Model CV2 belt conveyor 24" wide x 6' long with 1/2HP motor
  • Model BS 24/3 Three Head Stain Wiper 24" width capacity
  • Feed speeds 10-40 fpm with 1.5HP motor inverter controlled
  • Brush head speed - variable to 1000 RPM
  • Brush head motors 1HP each
  • Brush mounts are quick change type
  • Head adjustment is hand wheel with relative readout
  • Model RUV24/3 UV Cure Oven 24" wide x 3" thick capacity
  • Feed speed 10-40 fpm with 1/2HP motor inverter controlled
  • Feed belt is metal lattice
  • Exhaust fan motor 3/4HP
  • UV lamps (3 sets) 300 watt/inch
  • UV lamp control - 2 stage power adjustment with amp meters
  • Four (4) position lamp height adjustment
  • UV cabin temperature control - Heat probe with monitor and overtemp hazard signal
  • New in 2012

You may also be interested in