Warning: session_start(): open(/tmp/sess_0so3bghg1irgv7ckps5oebik83, O_RDWR) failed: No space left on device (28) in /home/rtmachine_web/rtmachine/connection/dbsvr.php on line 29
RT Machine Company

Used GMC Model TSG-8/80 NC Double End Tenoner

Stock #101108 - Available (As Taken From Service)

 

101108 GMC-01.jpg
101108 GMC-01.jpg
101108 GMC-02.jpg
101108 GMC-03.jpg
101108 GMC-04.jpg
101108 GMC-05.jpg
101108 GMC-06.jpg
101108 GMC-07.jpg
101108 GMC-08.jpg
101108 GMC-09.jpg
101108 GMC-10.jpg
101108 GMC-11.jpg
101108 GMC-12.jpg
101108 GMC-13.jpg
101108 GMC-14.jpg
101108 GMC-15.jpg
101108 GMC-16.jpg
101108 GMC-17.jpg
101108 GMC-18.jpg
101108 GMC-19.jpg
101108 GMC-20.jpg
101108 GMC-21.jpg
101108 GMC-22.jpg
101108 GMC-23.jpg
101108 GMC-24.jpg
101108 GMC-25.jpg
101108 GMC-26.jpg
101108 GMC-27.jpg
101108 GMC-28.jpg
101108 GMC-29.jpg
101108 GMC-30.jpg
101108 GMC-31.jpg
101108 GMC-32.jpg
101108 GMC-33.jpg

  • Opening 220-3000mm (9-120")
  • Thickness 8-50mm (.32-2")
  • Feed Speeds Variable to 24m (80')/minute
  • First Station Top Jump Scoring Saw 4.5HP; 7200 RPM NC control on horizontal and vertical axis
  • Second Station Bottom Jump Scoring Saw 4.5HP; 7200 RPM NC control on horizontal and vertical axis
  • Third Station Trim/Hogging Head 7.5/11HP; 50/100Hz; 3600/7200 RPM NC control on horizontal and vertical axis
  • Fourth Station Horizontal cutter 5.5HP; 7200 RPM with lower angle groover mounted - manual adjustment of horizontal axis and NC control on vertical axis
  • Fifth Station Jump Cope 11HP with 9" tall spindle, NC control on horizontal and vertical axis
  • Sixth Station Cope 11HP with 9" tall spindle, NC control on horizontal and vertical axis
  • Padded chain 3" wide with pop up dogs on 16" centers
  • Belt type hold down - driven
  • Infeed fence on left side NC controlled for setup
  • Serial no. 5186

You may also be interested in