Warning: session_start(): open(/tmp/sess_v8t0t0m2p6gofbkqmgseau3h52, O_RDWR) failed: No space left on device (28) in /home/rtmachine_web/rtmachine/connection/dbsvr.php on line 29
RT Machine Company

New Weeke Vantech 480 V7 PRO Powertouch CNC Router

Stock #5701N - Available (New)

 

5701N.jpeg
5701N.jpeg

  • 13.4 HP Vertical Router Motor
  • Gantry Enclosure
  • Seven Position Automatic Tool Changer
  • Tool Length Control
  • Seven Spindle Drill Block (4-X, 3-Y)
  • Single Field Processing
  • Three Vacuum Pumps
  • Matrix PRO Table, 2520 mm x 1250 mm
  • 3 Semi Automatically Controlled Vacuum Zones
  • Pre Wired to accept remote pendant
  • High precision dual drive gantry design
  • 100mm (3.9”) max part thickness
  • Automatic push off device with spoil board dust collection
  • Pneumatic side fences front and rear and two reference pins
  • Dust collection channel from below
  • Automatic transfer conveyor
  • Dust collection from above
  • Automatic tool change loading/unloading system
  • Operation Voltage 480 volts/ 3 phase/ 60 hz
  • Amperage Service 50 amps @ 480 volts
  • Control Voltage 24 volt
  • Total connected load 27.5 kw
  • Connection sizes (2) 200 mm, (1) 160 mm, (2) 140 mm
  • Air velocity (minimu) 28 m/sec – 92 ft/sec
  • Static Pressure Minimum 2200 Pascal
  • Air volume 8,300 m3/h – 4, 885 cfm

You may also be interested in