Used Holz-Her HOLZ-HER ARCUS 1336 FV2 EDGEBANDER

Stock #25130 - Sold (As Is)

 

25130-02.jpg
25130-02.jpg
25130-01.jpg
25130-03.jpg
25130-04.jpg
25130-05.jpg
25130-06.jpg
25130-07.jpg
25130-09.jpg
25130-08.jpg
25130-10.jpg
25130-11.jpg
25130-12.jpg
25130-13.jpg
25130-14.jpg
25130-15.jpg

  • This machine is in LIKE NEW condition!
  • .4 to 15 mm edge banding thickness capacity
  • Panel thickness 6 to 60 mm
  • Minimum workpiece width: 65 mm
  • Minimum workpiece length: 180 to 250 mm depending on units
  • Control PPC 231 Power PC controller with following features:
  • Windows like user interface
  • 15" SVGA touch screen
  • USB connection and Ethernet network connection
  • Program list with program names and numbers and extensive program store
  • 1802 Pre-milling station with (2) 2 KW 12,000 RPM motors
  • Servo motor positioning on fence via PPC 1901 edge feed magazine for fully automatic feed of coils and strips
  • Automatic guillotine for coiled material up to 3 mm
  • 1905 Gluing station
  • Glu-Jet Hybrid Technology
  • glue application through a nozzle applicator thermostatically controlled
  • Automatic reload of glue cartridges or granulated glue
  • Heating time approximately 3 to 4 minutes
  • One servo motor for the adjustment of the glue height
  • 1913M motorized pressure unit � with 1 axis servo motor for the adjustment of the edge thickness
  • 1925 End trim unit with (2) .65 KW 9,000 RPM motors, mounted with uni-point axis enabling quick change for chamfer trimming up to 10 degrees
  • "PCS" pneumatic changeover system
  • 1962 Rough trim unit with (2) 2 KW motors,servo motors programmable via control panel 1826MOT6 Fine trim unit with (2) .65 KW 12,000 RPM motors servo motors programmable via control panel
  • 1964 glue scraping unit with pneumatic engage/disengage via PPC
  • 1944 Top and bottom buffing unit with (2).20 KW motors
  • 2.2 KW Variable speed feed from 32.8 to 65 FPM
  • Motorized pressure beam with quick panel adjustment from screen control
  • Dust requirements: 2000 CFM (1 outlet at 120 mm, 1 outlet at 175 mm)
  • Electrical requirements: 56.07 amps @ 230 Volt
  • Machine dimensions: 23' long x 4' wide x 63" tall
  • NOTE: ONLY 272 hours on this machine!!

You may also be interested in