Used Homag Optimat BAZ 322/40/K CNC Machining Center

Stock #57112 - Sold (As Taken From Service)

 

57112.jpg
57112.jpg
57112a.jpg
57112b.jpg
57112d.jpg
57112f.JPG
57112g.JPG
57112h.JPG
57112i.JPG
57112k.JPG
57112l.JPG
57112m.JPG
Aggregate-01.JPG
Aggregate-02.JPG
Aggregate-03.JPG
Aggregate-04.JPG
Aggregate-05.JPG
Aggregate-06.JPG
Aggregate-07.JPG
Aggregate-08.JPG
Aggregate-09.JPG
IMG_5138.JPG

  • Video URL: https://www.youtube.com/watch?v=hAuDf7UPDAg
  • The Venture Edge BAZ is a machining center for routing, drilling, contour edgebanding and edge finishing
  • Includes Several Aggregates (See Photos): Two Sawing, One Angled Sawing, One Four-Sided Routing, Two Top & Bottom Edge-Trimming, One Angled Routing
  • It is equipped with an electronic control for batch size production of curvilinear components for the flat panel industry
  • The machine features two (2) independent Y-axes for main spindle and gluing unit 360 degrees with coil and strip feeding
  • These independent axes enable quick cycle times utilizing simultaneous tool changing while processing
  • K-type vacuum bench consoles with lifting rails and LED bench and vacuum cup setup aid
  • Power control with PC85
  • Main spindle 14.5 kW (19.44 HP), vector regulated
  • Plate-type tool changer for twelve (12) tools Interface for change-over of processing units with an integrated pneumatic supply and drive of 360 degree C-axis
  • Vertical boring head with seventeen (17) spindles
  • End trim saw unit
  • Gluing unit 360 degrees / individual strips
  • 2 coil magazine
  • Combination flush trimming scraping unit for thick edge, 3 mm (1/8”) typical
  • WoodWOP office PC software
  • Workpiece length in X-axis all tools in single operation max. 4000 mm (157-1/2”)
  • Workpiece width in Y-axis using front stops or Y zero, with router diameter max. 25.4 mm (1”), drilling, edgebanding and edge finishing max. 1525 mm (60-1/16”)
  • workpiece thickness in Z-axis with edge max. 60 mm (2-3/8”)
  • Boring Head Seventeen (17) Spindles – Vertical, • eleven (11) spindles in X-direction, seven (7) spindles in Y-direction
  • Four (4) Spindle Horizontal Boring Head with Saw
  • Large Assortment of Spare Saw and Router Tooling
  • Serial no. 0-201-03-7217
  • New in 2004

You may also be interested in